HighTech Finland › New Materials & Processes › Transport & Logistics ›  KONE shows the ropes

Forest Industry Applications
Manufacturing & Systems
Measurement & Testing
Transport & Logistics
KONE shows the ropes
A more energy-efficient flow
Improving the efficiency of cargo flows on land and at sea
Ice is their passion
Breaking the ice worldwide
All articles in this section


KONE shows the ropes

KONE Corporation
Traveling a kilometer is no huge feat – unless you want to make the journey upwards in a single elevator ride. No elevator manufacturer has figured out how to do this. Until now. The KONE UltraRope™ is a revolutionary technology set to break high-rise elevator limits.

At first glance it doesn’t look like much – a flat piece of black licorice, perhaps. But the superlight KONE UltraRope is a completely new take on elevator hoisting. Made of a carbon fiber core surrounded by a unique highfriction coating, the new rope weighs only about 19 percent of a similar strength conventional steel rope.

“You wouldn’t think it, but rope weight impacts everything,” says Samu Salmelin, who heads one of KONE’s global research and development units in Hyvinkää, Finland. “If you have a lighter rope, you can have a smaller and lighter elevator counterweight and sling. This means the overall moving masses are reduced.”

Put simply, the new technology enables massive cuts in the deadweight that is moved up or down every time someone hops into a highrise elevator. Less deadweight means smaller energy consumption and operating costs. “When components are smaller, the logistics are easier,” says Salmelin, adding that installing huge components inside relatively cramped skyscrapers is always a challenge. “The environmental impact is also smaller when materials are lighter.“

Reinventing the elevator

The world’s tallest building standing at over one kilometer upon completion in 2018, Kingdom Tower will feature KONE’s people flow solutions including UltraRope. 
Traveling more than 500 meters, or 100-odd floors, in a continuous elevator trip is challenging and doesn’t really make sense using conventional technology. At that point, the weight of the several kilometers of rope needed to hoist the elevator becomes an obstacle. More ropes are needed just to lift the weight of the ropes.

In a building this tall, the moving masses of a single elevator hoisted with steel ropes can be some 27,000 kilograms. This is equal to fitting ten off-road vehicles inside the shaft and shifting them along with the elevator. Using KONE UltraRope for hoisting in a similar shaft, the moving masses are roughly 13,000 kilograms, or about the weight of four off-road vehicles. 

Limits set by ropes are a major reason why most very tall buildings have sky lobbies served by shuttle elevators from the ground. Separate elevators take people higher from these lobbies in the sky. In the future, KONE UltraRope will enable elevator travel all the way from ground floor to penthouse in a kilometer-high building in one continuous journey.

“We are on the brink of something big. In a sense, we have reinvented the high-rise elevator,” says Salmelin. KONE UltraRope is compatible with all other KONE high-rise solutions so it can be used to replace conventional ropes in old buildings. And with the new technology, the higher you go, the bigger the benefits. For example, the energy savings for a 500-meter elevator journey are around 15 percent versus conventional rope. For an 800-meter journey, the savings are over 40 percent.

Core strength

In addition to being very light, carbon fiber is strong and durable. It has already revolutionized products in several other industries, including aviation and sporting equipment.

At KONE, the idea of creating a carbon fiber rope came in 2004. “The first prototypes were made by hand,” says Salmelin. Actual research and development began a few years later. It wasn’t long before the rope was fitted into a  shaft at KONE’s Tytyri high-rise testing laboratory in Southern Finland.

“We were surprised by how problem-free it was,” says Salmelin.“ Often, there are a lot of problems when you develop something completely new. But our faith in this started to grow very quickly.” The rope has since been tested thoroughly both in real elevators and in laboratories.

Properties like tensile strength, bending lifetime, material aging and the impact of extreme temperatures and humidity are just some of the qualities that have been measured.

No rust, no wear

Unlike steel, carbon fiber does not rust, stretch or wear. The special coating of the new rope makes lubrication unnecessary, meaning environmentally friendlier maintenance. Carbon fiber also resonates at a completely different frequency to most building materials. This means KONE Ultra- Rope is less sensitive to building sway, and elevator downtime during strong winds and storms can be reduced. While typical high-rise elevator ropes need to be changed at regular intervals – no easy task in a tall building – the new technology enables a rope lifetime twice that of conventional ropes. KONE has also developed a realtime rope condition monitoring system.

“We have a rope that works, is reliable, and delivers on our promises,” Salmelin beams. “This is a good place to move on from.”

KONE UltraRope can enable future elevator travel heights up to 1,000 meters – twice as high as what is possible with today’s technology.


The benefits of KONE UltraRope increase exponentially as the travel distance grows.

> Liisa Kivelä
(Published in HighTech Finland 2015)